Icsdomain mshome net что это
Вопрос
Here is my problem:
I have setup a WDS server on a Windows 2008R2 server. I have been able to deploy servers but all my attempt to join computers to the domain failed.
I think the reason is that i have problem with my DHCP scope. The dhcp server is set locally on my WDS server. The WDS server has two NICs. The first one is configured on my AD domain and i have shared this network connection. The second NIC is configured on my deployment VLAN and thats were the DHCP server is listening.
The weird thing is that when i install the DHCP server i cannot manage it at all. The server shows up with a name like hostname.mshome.net i can restart it but i cannot configure the scope at all. So my clients get a dhcp address, i can deploy images but i cannot configure the scope so they can get a valid default gateway, hence they cant talk with any DC and any attempt to join the domain fails.
I tried reinstalling DHCP even though i can give the default gateway during role installation, the configuration fails.
Why this mshome.net domain?
DHCP Server: Installation succeeded with errors
| : Attempt to configure DHCP Server failed with error code 0x80074E54. The scope parameters are incorrect. Either the scope already exists or its subnet address and mask is inconsistent with the subnet address and mask of an existing scope. |
Please refer to the full log at: ‘C:\Users\etcapacc\AppData\Local\Temp\2\ServerManager.log’
4568: 2010-04-12 16:45:48.196 [DHCP] Begin DhcpCreateSubnet, subnetAddress = 176294144, subnetInfo =
4568: 2010-04-12 16:45:48.196 [DHCP] Error (Id=0) End DhcpCreateSubnet, error code = 20052
Icsdomain mshome net что это
Настройка сетей, доступа в интернет и сетевого оборудования
Жузик,
ип меняется на стороне провайдера
и тв на это никак не повлияеш
Если что- стучись в асю. Не обещаю ответить быстро, но эффективно. 🙂
В ближайших покупках ноутбук, соответственно хочу сделать Wi-Fi сеть.
ББ выключать буду, значит необходим роутер, чтобы был доступен интернет.
Интернет у меня идет по ADSL. Кабель телефонный, RJ-11 если не ошибаюсь.
Модем в данный момент подключается по USB.
Имеется и сетевая карта.
Значит, что хочу: купить роутер.
Чтобы в нем был Wi-Fi, разъем для телефонного кабеля (RJ-11), DSL-модем (чтобы выкинуть старый d-link), ну и все собственно. Как я понимаю, везде есть RJ-45, ну по нему подключу роутер к ББ.
Что посоветуете? Какие модели оптимальны? Какие модели крайне не желательны?
Буду рад любому совету.
Я настроился на него, спасибо n0v0
Я дома пользуюсь D-Link DSL-G604T. Честно говоря, доволен очень. Это ADSL-модем и Wi-Fi/Ethernet роутер в одном флаконе. Обошелся мне в довольно скромные 80$. С помощью него объединил в беспроводную локальную сеть стационарный домашний ПК, свой ноутбук, а также Dell X51v. Ну и, конечно же, все три устройства спокойно кушают интернет по Wi-Fi, причем абсолютно независимо, т.е., например, достаточно включить роутер (и не включать ни один из ББ), и можно свободно пользоваться интернетом на КПК. Очень удобно.
Это да. Но, с другой стороны, последняя прошивка вышла в конце марта сего года. WPA2 добавили, в частности. Так что устарел он разве что в том плане, что поддерживает только стандарт IEEE 802.11g (скорость ограничена 54 Мбит/с). Да и ошибки из прошивки к этому времени практически все вычистили. По крайней мере, все нужные мне функции работают ровно так, как от них и ожидаешь.
В смысле, не в домене?
А мне нужно, чтобы и eMule работал.
Какой прокси лучше: usergate или wingate? Или ещё какой-то?
PS: надо срочно, потому что скоро уезжаю на лето в другой город, где не будет инета, и надо скачать много файлов из инета, а траффик и деньги кончились. Может мне в аську кто-нибудь стукнет и объяснит? 261651981 С меня +1 к репутации. Или хоть +5.
Icsdomain mshome net что это
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Answered by:
Question
Here is my problem:
I have setup a WDS server on a Windows 2008R2 server. I have been able to deploy servers but all my attempt to join computers to the domain failed.
I think the reason is that i have problem with my DHCP scope. The dhcp server is set locally on my WDS server. The WDS server has two NICs. The first one is configured on my AD domain and i have shared this network connection. The second NIC is configured on my deployment VLAN and thats were the DHCP server is listening.
The weird thing is that when i install the DHCP server i cannot manage it at all. The server shows up with a name like hostname.mshome.net i can restart it but i cannot configure the scope at all. So my clients get a dhcp address, i can deploy images but i cannot configure the scope so they can get a valid default gateway, hence they cant talk with any DC and any attempt to join the domain fails.
I tried reinstalling DHCP even though i can give the default gateway during role installation, the configuration fails.
Why this mshome.net domain?
DHCP Server: Installation succeeded with errors
| : Attempt to configure DHCP Server failed with error code 0x80074E54. The scope parameters are incorrect. Either the scope already exists or its subnet address and mask is inconsistent with the subnet address and mask of an existing scope. |
Please refer to the full log at: ‘C:\Users\etcapacc\AppData\Local\Temp\2\ServerManager.log’
4568: 2010-04-12 16:45:48.196 [DHCP] Begin DhcpCreateSubnet, subnetAddress = 176294144, subnetInfo =
4568: 2010-04-12 16:45:48.196 [DHCP] Error (Id=0) End DhcpCreateSubnet, error code = 20052
Icsdomain mshome net что это
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Answered by:
Question
Here is my problem:
I have setup a WDS server on a Windows 2008R2 server. I have been able to deploy servers but all my attempt to join computers to the domain failed.
I think the reason is that i have problem with my DHCP scope. The dhcp server is set locally on my WDS server. The WDS server has two NICs. The first one is configured on my AD domain and i have shared this network connection. The second NIC is configured on my deployment VLAN and thats were the DHCP server is listening.
The weird thing is that when i install the DHCP server i cannot manage it at all. The server shows up with a name like hostname.mshome.net i can restart it but i cannot configure the scope at all. So my clients get a dhcp address, i can deploy images but i cannot configure the scope so they can get a valid default gateway, hence they cant talk with any DC and any attempt to join the domain fails.
I tried reinstalling DHCP even though i can give the default gateway during role installation, the configuration fails.
Why this mshome.net domain?
DHCP Server: Installation succeeded with errors
| : Attempt to configure DHCP Server failed with error code 0x80074E54. The scope parameters are incorrect. Either the scope already exists or its subnet address and mask is inconsistent with the subnet address and mask of an existing scope. |
Please refer to the full log at: ‘C:\Users\etcapacc\AppData\Local\Temp\2\ServerManager.log’
4568: 2010-04-12 16:45:48.196 [DHCP] Begin DhcpCreateSubnet, subnetAddress = 176294144, subnetInfo =
4568: 2010-04-12 16:45:48.196 [DHCP] Error (Id=0) End DhcpCreateSubnet, error code = 20052
Question: Q: mshome.net taking over DNS settings on Airport
Hey all,
I have a network set up with Windows computers only via an Ethernet and using a D-Link 300 router with wireless available. However, sometimes (seemingly randomly) when I connect to the network wirelessly through my Macbook Pro’s Airport, the internet does not work. The reason is that for some reason my DNS server changes from nsw.bigpond.net.au to mshome.net, and I am sure that I have connected to the server because I can access my router + shared folders.
How can I stop my Airport from picking up mshome.net? I have tried doing an ipconfig /renew on both of the Windows computers and they both come up with the correct DNS themselves.
Macbook Pro 15″, Mac OS X (10.5.6)
Posted on Apr 8, 2009 1:37 AM
All replies
Loading page content
Page content loaded
The problem is almost certainly that there are two DHCP servers running on your network, and one is providing the bigpond DNS server address and one the mshome.net address.
The reason it’s somewhat random is that when there are multiple DHCP servers running, it’s a pure race condition as to which DHCP server responds to your requests for an IP address first, and it’s that DHCP server that provides your DNS information.
What does your connection to the Internet look like?
For example, if your wired network shares a switch with a cable modem and the D-Link is connected to the same switch, you’d get the «correct» IP address if your cable modem responded to your DHCP request first, and the «incorrect» information if your D-Link did.
Note it could also be one of your Windows PCs, if any of them inadvertently have Internet Connection Sharing turned on.
If you Google «mshome.net» you’ll find that the latter is quite common.
Haha I hope that makes sense. The Internet goes into the D-Link router, which then connects wirelessly to MBP and via ethernet to both a windows computer and switch. The switch is then connected to various rooms in the house but at the moment only a single computer is attached to the switch.
