camera ready paper что это
camera-ready
1 camera-ready
camera-ready art — оригинал, подготовленный к фотографированию
2 camera-ready
3 camera-ready
4 camera-ready
5 camera-ready
6 camera-ready
7 camera-ready
8 camera-ready
9 camera-ready
10 camera ready
11 подготовленный к съемке
См. также в других словарях:
Camera ready — is a common term used in the commercial printing industry meaning that a document is, from a technical standpoint, ready to go to press, or be printed. In live television, camera ready refers to a person s presentability such as a newsreader… … Wikipedia
camera-ready — [kam′ər əred΄ē] adj. Printing designating or of copy, artwork, etc. that is ready to be photographed for making into a plate for printing … English World dictionary
camera-ready — In graphic design, two dimensional artwork that is ready be given to a person who will photograph it so that printed versions can be produced. Although a physical image or piece of copy is still sometimes produced, and is employed in this… … Glossary of Art Terms
camera-ready — /kam euhr euh red ee, kam reuh /, adj. Print. (of text or illustrations) ready to be photographed. Also, camera. * * * … Universalium
camera-ready — /kam euhr euh red ee, kam reuh /, adj. Print. (of text or illustrations) ready to be photographed. Also, camera … Useful english dictionary
camera-ready — (about a graphic or document) ready to be printed, ready to be reproduced, ready to be photographed and photoengraved onto a printing plate (Printing) … English contemporary dictionary
camera-ready — cam′era read′y adj. pri (of text or illustrations) ready to be photographed • Etymology: 1965–70 … From formal English to slang
camera ready — adjective Art or hard copy (a document or graphic art) that requires no additional work to be done to it before copies of it can be reproduced. It is commonly used in situations where separate documents will be compiled into a single compilation … Wiktionary
Camera-ready — Подготовленный к съёмке … Краткий толковый словарь по полиграфии
camera-ready — adjective Printing in the right form to be reproduced photographically on to a printing plate … English new terms dictionary
camera-ready copy — noun (printing) Finished text and/or illustrations ready for conversion to film from which printing plates will be made • • • Main Entry: ↑camera … Useful english dictionary
Camera-Ready Submission Instructions
1. Publication
2. Camera-ready Submission Guidelines
3. Creating IEEE Xplore-Compatible PDF
4. Upload to EDAS submission site
Please note that PDF eXpress is NOT a file collection site.
The Camera-Ready submission site is https://edas.info/index.php?c=24283. This will let you approve the IEEE copyright notice for your paper and then upload the file produced by PDF eXpress.
Copyright clearance code notice of the manuscript
The following information must be inserted as the copyright clearance code on the first page of each paper before creating PDFs. The appropriate copyright clearance code notice is to appear on the bottom of the first page of each paper according to the guidelines set forth in the Cataloging/Copyright Instructions for an IEEE Conference Proceeding.
For papers in which all authors are employed by the US government, the copyright notice is: U.S. Government work not protected by U.S. copyright
For papers in which all authors are employed by a Crown government (UK, Canada, and Australia), the copyright notice is: 978-1-5386-4533-8/18/$31.00 ©2018 Crown
For papers in which all authors are employed by the European Union, the copyright notice is: 978-1-5386-4533-8/18/$31.00 ©2018 European Union
For all other papers the copyright notice is: 978-1-5386-4533-8/18/$31.00 ©2018 IEEE
camera-ready copy
Смотреть что такое «camera-ready copy» в других словарях:
camera-ready copy — noun (printing) Finished text and/or illustrations ready for conversion to film from which printing plates will be made • • • Main Entry: ↑camera … Useful english dictionary
Camera-ready copy — Оригинал, подготовленный для фотографирования; оригинал макет; Оригинал, для фотографирования; Оригинал макет … Краткий толковый словарь по полиграфии
camera-ready — [kam′ər əred΄ē] adj. Printing designating or of copy, artwork, etc. that is ready to be photographed for making into a plate for printing … English World dictionary
camera-ready — In graphic design, two dimensional artwork that is ready be given to a person who will photograph it so that printed versions can be produced. Although a physical image or piece of copy is still sometimes produced, and is employed in this… … Glossary of Art Terms
camera ready — adjective Art or hard copy (a document or graphic art) that requires no additional work to be done to it before copies of it can be reproduced. It is commonly used in situations where separate documents will be compiled into a single compilation … Wiktionary
camera — n. 1 an apparatus for taking photographs, consisting of a lightproof box to hold light sensitive film, a lens, and a shutter mechanism, either for still photographs or for motion picture film. 2 Telev. a piece of equipment which forms an optical… … Useful english dictionary
Stat camera — A stat camera is a large format vertical or horizontal stationary camera used to shoot film from camera ready artwork. This is a large bellows type camera which consists of the copy board, bellows and lens, and filmboard. The vertical type can… … Wikipedia
History of the single-lens reflex camera — The history of the single lens reflex camera predates the invention of photography in 1826/27 by one and a half centuries with the use of a reflex mirror in a camera obscura first described in 1676. Such SLR devices were popular as drawing aids… … Wikipedia
Typewriter — Mechanical desktop typewriters, such as this Underwood Five, were long time standards of government agencies, newsrooms, and offices … Wikipedia
Killian documents controversy — Further information: Killian documents authenticity issues and George W. Bush military service controversy Charles Johnson s animated GIF image comparing what CBS claimed to be a 1973 era typewritten memo with a 2004 era Microsoft Word… … Wikipedia
Camera Ready Paper Guidelines
Camera Ready Paper Guidelines
Deadline
The submission deadline for camera ready material and copyright forms is July 25, 2018 (11:59pm Pacific Daylight Time). This deadline will not be extended. The ECCV 2018 proceedings will be published by Springer, in the LNCS series (Lecture Notes in Computer Science), and a version will be archived at the Open Access CVF site.
For each paper, at least one author has to be registered for attending the conference by the camera ready deadline. Without a valid registration at the conference by the deadline, your paper will not be published.В Papers that arrive after the deadline may not appear on the conference LNCS proceedings or the CVF site, and may not be placed in Springerlink.
Author kit
The author kit for the camera ready manuscripts is different from that for initial submissions. (The differences from the initial submission kit are mostly in the part until the \maketitle command).
\usepackage[width=122mm,left= 12mm,paperwidth=146mm,height= 193mm,top=12mm,paperheight= 217mm]
When you use the new template (and cls file), you may find more space around the text area. That is normal, the size of the text area is specified by the class file.
The camera ready manuscripts have to be prepared using LaTeX2e and the provided author kit:
It is possible, but discouraged, to use other systems for the preparation of papers, e.g. MS-Word. Author kits may be found on the Springer LNCS site, under “Proceedings and Other Multiauthor Volumes“.
Instructions and policies
Paper length:
Papers may be up to 14 pages long (excluding references). Important: Springer will edit the provided source files in order to insert running heads etc. and to smooth out any formatting inconsistencies. Hence, do not reduce the paper length e.g. by reducing vertical spaces between paragraphs or the like, as this will be corrected by Springer, possibly resulting in an increase of the paper length. To avoid any problem, please use the author kit recommended above and follow its formatting instructions.
Author names:
Please write out author names in full in the paper, i.e. full given and family names. If any authors have names that can be parsed into FirstName LastName in multiple ways, please include the correct parsing in a comment to the editors, below the \author<> field.
Copyright forms:
Authors must submit a signed Consent to Publish form, through which the copyright of their paper is transferred to Springer. Please download the template of the form here:
Please fill this form, sign it, and scan it as a single PDF file, named XXXX-copyright.PDF, where XXXX is the four-digit paper ID (zero-padded if necessary). For example, if your paper ID is 24, the filename must be 0024-copyright.pdf. This file needs to be among the source files you are going to submit.
You will see that the conference name and the names of the volume editors are entered in advance. Please note that the main conference proceedings and the workshop proceedings have different copyright forms, and make sure you use the correct one. One author may sign on behalf of all of the authors of a particular paper, provided that permission to do so has been accorded by the other authors in advance. We do not accept digital signatures. If you have any queries regarding copyright, please contact Springer or the Publication Chairs well in advance of publication. Accepted papers will be published by Springer (with appropriate copyrights) electronically after the main conference, but they will be made online at the CVF website two weeks after the submission of the camera ready. Please make sure to discuss this issue with your legal advisors as it pertains to public disclosure of the contents of the papers submitted, and contact the Publication Chairs if there is any sensitivity on the date of publication.
How to submit camera ready papers:
We need all the source files (LaTeX files, style files, special fonts, figures, bib-files, Word or RTF files) that are required to compile papers, as well as the camera ready PDF. For each paper, one ZIP-file has to be prepared and submitted via theВ ECCV 2018 Submission Website, using the password you received with your initial registration on that site. The size of the ZIP-file may not exceed the limit of 30 MByte. The ZIP-file has to contain the following:
If you wish to provide supplementary material, the file name must be in the form XXXX-supp.pdf or XXXX-supp.zip, where XXXX is the zero-padded, four-digit paper ID as used in the previous step. Upload your supplemental file on the “File Upload” page as a single PDF or ZIP file of 100 MB in size or less. Only PDF and ZIP files are allowed for supplementary material. You can put anything in this file – movies, code, additional results, accompanying technical reports–anything that may make your paper more useful to readers. If your supplementary material includes video or image data, you are advised to use common codecs and file formats. This will make the material viewable by the largest number of readers (a desirable outcome). ECCV encourages authors to submit videos using an MP4 codec such as DivX contained in an AVI. Also, please submit a README text file with each video specifying the exact codec used and a URL where the codec can be downloaded. Authors should refer to the contents of the supplementary material appropriately in the paper.
Check that the upload of your file (or files) was successful either by matching the file length to that on your computer, or by using the download options that will appear after you have uploaded. Please ensure that you upload the correct camera-ready PDF–renamed to XXXX.pdf as described in the previous step as your camera-ready submission. Every year there is at least one author who accidentally submits the wrong PDF as their camera-ready submission.
Springer is the first publisher to implement the ORCID identifier for proceedings, ultimately providing authors with a digital identifier that distinguishes them from every other researcher. ORCID (Open Researcher and Contributor ID) hosts a registry of unique researcher identifiers and a transparent method of linking research activities to these identifiers. This is achieved through embedding ORCID identifiers in key workflows, such as research profile maintenance, manuscript submissions, grant applications and patent applications.
Please seeВ https://www.springer.com/gp/authors-editors/orcid В for more details. We encourage all contributing authors to also apply for an individual ORCID-ID atВ www.orcid.org В and include these in their paper with \OrcidID command. (If you get an error with \OrcidID, you probably have an older class file; please download the updated Author kit for camera ready paper )
For each paper, at least one author has to be registered for attending the conference by the camera ready deadline. Without a valid registration at the conference by the deadline, your paper will not be published. Both student and full registrations are fine for this purpose.
For any question related to the publication process, please do not hesitate to contact the publication chairs.
Please kindly use the checklist below to deal with some of the most frequently encountered issues in ECCV submissions.
Instruction for Camera-Ready Submission
Aug 31, 2021 These instructions are adapted from the ones for ACL 2020, EMNLP 2020, NAACL 2021 and ACL 2021.
To submit your camera-ready version, please go to the softconf site, click the submission id, and then click “Final Camera Ready Submission”. This document is organized based on the sections in the Final Submission Page. Please note that the following applies to the EMNLP main conference papers and Findings of EMNLP papers. It will also apply to EMNLP workshop papers unless the workshops have their own instructions.
Please remember to use the template files for the conference and follow the instructions in this document. In addition, you need to run a tool called aclpub_check developed by the NAACL2021 publication chairs to automate the checking for some frequently encountered formatting issues. For details of the tool, see Section 3 and the Appendix. Camera-ready copies that fail to meet these instructions will be returned for re-submission.
1. Metadata (Part A in the final submission form)
Can I make changes to the author list in the camera-ready version?
No, you cannot change the author list. In fact, the authors’ field will not be editable in the final submission form.
How should I enter metadata on the START system?
The metadata (title, author, abstract) that you enter into START is very important, because it is used on the conference website, proceedings, handbook, mobile app, and the ACL Anthology (and propagates to Google Scholar, etc.).
Before the metadata is entered, please have all authors ensure that the name in their START profile (User Console, Update Profile) appears exactly the way that they want it to appear.
The metadata should be written using Unicode (UTF-8) with LaTeX commands. Please try to follow these guidelines:
Can peech and
It is important to only protect those first letters that belong to the categories exhibited above, i.e., proper names (including language names), acronyms, abbreviations, the first letter after punctuation (such as a colon) and the first letter in a sentence. These curly braces will not appear in the online conference program or proceedings. They will only appear in the BibTeX file that others will use to cite your paper.
Name change policy
If you have changed your name and you are concerned that your previous name is being cited in EMNLP publications, email the EMNLP publication chairs by September 12, 2021 (the sooner the better!). We will search the proceedings and request the authors to change the citations before it gets published to ACL anthology. However, we cannot guarantee that the authors who miscited you comply.
Please see the NAACL 2021 blog post about the first iteration of this policy for more details: https://2021.naacl.org/blog/name-change-procedure/
2. Copyright (Part B in the form)
What about copyright?
When you submit the paper, you will be asked to sign the ACL Copyright Transfer Agreement on behalf of all authors, electronically (via the START Conference Manager). Authors retain many rights under this agreement and it is appropriate in the vast majority of cases. Please contact the publication chairs with any concerns regarding copyright.
Who should sign the copyright form?
Before signing this form, please confirm with your co-authors (and, if applicable, your and their employers) that they authorize you to sign on their behalf. Only the authorized representative needs to sign the copyright form. Please sign your full name (not just your first or last initials).
3. Main paper (Part C in the form)
What are the page limits?
For both long and short papers, EMNLP 2021 allows one extra page to help address reviewer comments. Please use the extra space to help address reviewer comments. Long papers are permitted at most 9 pages of text and short papers may use up to 5 pages of text, plus unlimited space for ethical considerations sections, impact statement, acknowledgements, and references.
What is the max size of the PDF file?
The max size of the PDF file (including the Appendices, see Section 4) should be no more than 20MB.
What is the format for the camera-ready copy?
The file must be in Portable Document Format (PDF) on A4 paper. We require the use of ACL LaTeX style files or Microsoft Word style files tailored for this year’s ACL conference. You can access the style files and detailed formatting instructions here: https://2021.emnlp.org/call-for-papers/style-and-formatting or https://www.overleaf.com/latex/templates/emnlp-2021-template/hqchdxrsnwjs. If you are using LaTeX, please create the PDF file with pdflatex or xelatex. This ensures use of the proper Type 1 fonts and also takes advantage of other PDF features. You will have the best results using a modern LaTeX distribution, in particular, TeX live. Using the geometry package to set the A4 format is recommended.
How do I check the format of the camera-ready version before submitting?
You should check the paper format according to this instruction page and use the style template files with the links above. The NAACL2021 publication chairs have developed a package called aclpub_check to automate much of the format checking (See the Appendix for details). Please run this package before submitting your paper to softconf in order not to miss some subtle formatting details. Note: We also strongly advise authors to use rebiber to update their bib files with updated citations automatically.
How should the final copy differ from the original submission?
The camera-ready version of your paper should incorporate the comments of the reviewers as well as other changes you see fit to make. In addition, be sure to do all of the following:
What are the tips to make my final version more accessible?
As a central venue of publication for our community, please prioritise the accessibility of your final version. The Diversity & Inclusion committee for ACL 2020 has outlined some tips on how to do this: https://acl2020.org/blog/accessibility-for-camera-ready/
How do I ensure that my file is correctly formatted?
You need to run the aclpub_check package (see the Appendix), and pay special attention to things like the following:
The paper size: Your paper needs to be formatted to A4. Here are a couple of ways to check this:
What if my paper includes graphics?
Remember that you are providing a camera-ready copy. Thus, artwork and photos should be included directly in the paper in their final positions. Ideally, you should use vector graphic formats (PDF, EPS), which allow the graphics to scale arbitrarily. Avoid GIF or JPEG images that are low resolution or highly compressed.
Your paper must look good both when printed (A4 size) and when viewed on screen as PDF (zoomable to any size, color okay). Thus, you may want to use color high-resolution graphics, allowing readers to zoom in on a graph and study it. However, please check that the same graph or photograph is legible when printed and in a PDF viewer at different resolutions. Don’t go overboard on resolution; keep file sizes manageable. Note that vector graphics (e.g., encapsulated PostScript) look good at any scale and take up little space (unless you are plotting many thousands of data points).
What if my paper’s title or abstract has changed?
4. The Appendices (As the last part of the pdf file for Part C in the form)
Appendices are for things such as lemmas, hyperparameters, formulas, proofs, and tables that are informative but not critical to the understanding of the paper.
Where do the Appendices go?
Appendices should be part of the PDF file uploaded to Part C in the form. It should appear at the end of the PDF file, after the references.
What’s the page limit of the Appendices?
The Appendices do not count towards the page limit of the main paper, as recommended by the publication chairs.
What template should the Appendices use?
The Appendices should use exactly the same template as the main paper (See Section 3).
5. Additional document for conditionally accepted papers (Part D in the form)
Who needs to submit a document for Part D?
That depends on the status of your paper:
What should the document look like?
In this document, authors need to provide a short document that explains how they have made the changes requested by the EC meta-reviews (which appears at the bottom of all other reviews and has a special heading). The document can be either a plain text file or a PDF file, and should list each of the concerns from the original EC meta-review along with a short summary of what was done to remedy the concern.
To make this as straightforward as possible, we recommend copying and pasting the contents of the EC meta-review into the document and then describing the action taken after each item in the EC metareview. If there are additional issues mentioned in EC reviews that were not included in the EC metareview, authors may choose to address those points as well; however, only the points mentioned in the EC meta-review will be the basis of whether the final version of the paper will be accepted. This explanatory document will not be made public; it is just to expedite the conditional acceptance workflow for the EC’s review process.
The size of this document should be no more than 10MB.
What will happen after September 9?
The EC chairs will go over this document and check the camera-ready version to determine whether the required changes have been included in the camera-ready version. If so, the condition will be removed, the paper will be accepted to the main conference or Findings, and the status of having been conditionally accepted will not be publicly visible. If not, the paper will be rejected. The PCs will inform the authors of the final EC decisions by September 16, 2021.
If you have any questions about EC reviews or the changes required by EC, you can contact the EMNLP 2021 Ethics Chairs. You can also check the Ethics FAQ at https://2021.emnlp.org/call-for-papers#ethics-policy.
6. Supplementary material (Part E in the form)
Where do supplemental materials go?
Supplemental material contains software and data uploaded separately as zip files. The maximum size of a zip file is 20MB.
Do I need to submit latex source files?
No. Latex files will not be used in ACL Anthology, thus please do NOT submit them.
When and where do I send my final camera-ready paper?
You must submit the final version of your paper by September 9, 2021 (11:59pm, UTC-12 hours, “anywhere on Earth”) by navigating to the EMNLP 2021 START login page and following the internal links. This is a firm deadline, i.e., no change will be accepted after that.
8. Questions or Comments
If you have any questions about:
Please do NOT contact EMNLP PCs unless your questions cannot be answered by the publication chairs or the EC committee.
Appendix: Checking the format with the aclpub_check package
Following NAACL 2021, we are using a package called “aclpub_check” that automatically detects author formatting errors, margin violations as well as many other common formatting errors. Before submitting your paper to softconf, please run the package first and fix the detected errors.
A.1: Access the package
The package is written in Python and there are four steps to using it:
PAPER_TYPE should be the word short or long. PAPER_NAME can be any valid file name.
Below, we are walking you through how to use the tool by considering three papers published by publication chairs at NAACL 2021.
First, consider Josef Valvoda’s paper “What About the Precedent: An Information-Theoretic Analysis of Common Law”
python3 aclpub_check/formatchecker.py –paper_type long precedent.pdf
Checking precedent.pdf
Error (Margin): An image on page 1 bleeds into the margin.
We detected 1 error and 0 warnings in your paper.
Thus, we see this paper has a margin violation. The script output a png called “errors-precedent-page-1.png” which you can see below:
It shows that Josef has to shrink the first-page picture to make the paper compliant with the NAACL formatting rules. This is easily remedied with the adjustbox https://www.ctan.org/pkg/adjustbox package or a similar bit of LaTeX.
Next, consider Tiago Pimentel and Irene Nikkarinen’s paper: “How (Non-)Optimal is the Lexicon?”
python3 aclpub_check/formatchecker.py –paper_type long lexicon.pdf
Checking lexicon.pdf
Error (Margin): Text on page 13 bleeds into the margin.
This time, the automatically generated png shows me that the authors didn’t keep some math equations out of the margin in a proof in the appendix.
Here, it’s likely that the equations have to be broken over two lines.
Finally, consider Jennifer White’s paper “A Non-Linear Structural Probe”
python3 aclpub_check/formatchecker.py –paper_type short structural.pdf
All Clear!
So, there were no mistakes!
The script checks for many violations, e.g. page-limit violations, font and font size violations and even a few common typos. The script even makes recommendations about citing non-arXiv versions of papers. These, however, are simply warnings:
Warning (Bibliography): It appears you are using arXiv links more than you should (18/55). Consider using ACL Anthology DOIs instead.